How to Make Dynamite

How to Make Dynamite                        

Dynamite is nothing more than just nitroglycerin and a stablizing
agent to make it much safer to use.  For the sake of saving time, I
will abbreviate nitroglycerin with a plain NG.  The numbers
are percentages, be sure to mix these carefully and be sure to use the
exact amounts.  These percentages are in weight ratio, not volume.

no.  ingredients                 amount
---------------------------------------
#1   NG                          32
     sodium nitrate              28
     woodmeal                    10
     ammonium oxalate            29
     guncotten                    1
#2   NG                          24
     potassium nitrate            9
     sodium nitate               56
     woodmeal                     9
     ammonium oxalate             2
#3   NG                          35.5
     potassium nitrate           44.5
     woodmeal                     6
     guncotton                    2.5
     vaseline                     5.5
     powdered charcoal            6
#4   NG                          25
     potassium nitrate           26
     woodmeal                    34
     barium nitrate               5
     starch                      10
#5   NG                          57
     potassium nitrate           19
     woodmeal                     9
     ammonium oxalate            12
     guncotton                    3
#6   NG                          18
     sodium nitrate              70
     woodmeal                     5.5
     potassium chloride           4.5
     chalk                        2
#7   NG                          26
     woodmeal                    40
     barium nitrate              32
     sodium carbonate             2
#8   NG                          44
     woodmeal                    12
     anhydrous sodium sulfate    44
#9   NG                          24
     potassium nitrate           32.5
     woodmeal                    33.5
     ammonium oxalate            10
#10  NG                          26
     potassium nitrate           33
     woodmeal                    41
#11  NG                          15
     sodium nitrate              62.9
     woodmeal                    21.2
     sodium carbonate              .9
#12  NG                          35
     sodium nitrate              27
     woodmeal                    10
     ammonium oxalate             1
#13  NG                          32
     potassium nitrate           27
     woodmeal                    10
     ammonium oxalate            30
     guncotton                    1
#14  NG                          33
     woodmeal                    10.3
     ammonium oxalate            29
     guncotton                     .7
     potassium perchloride       27
#15  NG                          40
     sodium nitrate              45
     woodmeal                    15
#16  NG                          47
     starch                      50
     guncotton                    3
#17  NG                          30
     sodium nitrate              22.3
     woodmeal                    40.5
     potassium chloride           7.2
#18  NG                          50
     sodium nitrate              32.6
     woodmeal                    17
     ammonium oxalate              .4
#19  NG                          23
     potassium nitrate           27.5
     woodmeal                    37
     ammonium oxalate             8
     barium nitrate               4
     calcium carbonate             .5

Household equivalants for chemicles

It has come to my attention that many of these chemicles are
sold under brand names, or have household equivalants.  here is a list
that might help you out. Also, see elsewhere in this Cookbook for
a more complete listing............

acetic acid                vinegar
aluminum oxide             alumia
aluminum potassium sulfate alum
aluminum sulfate           alum
ammonium hydroxide         ammonia
carbon carbonate           chalk
calcium hypochloride       bleaching powder
calcium oxide              lime
calcium sulfate            plaster of paris
carbonic acid              seltzer
carbon tetrachloride       cleaning fluid
ethylene dichloride        Dutch fluid
ferric oxide               iron rust
glucose                    corn syrup
graphite                   pencil lead
hydrochloric acid          muriatic acid
hydrogen peroxide          peroxide
lead acetate               sugar of lead
lead tetrooxide            red lead
magnesium silicate         talc
magnesium sulfate          Epsom salts
naphthalene                mothballs
phenol                     carbolic acid
potassium bicarbonate      cream of tartar
potassium chromium sulf.   chrome alum
potassium nitrate          saltpeter
sodium dioxide             sand
sodium bicarbonate         baking soda
sodium borate              borax
sodium carbonate           washing soda
sodium chloride            salt
sodium hydroxide           lye
sodium silicate            water glass
sodium sulfate             glauber's salt
sodium thiosulfate         photographer's hypo
sulferic acid              battery acid
sucrose                    cane sugar
zinc chloride              tinner's fluid

Keep this list handy at all times. If you can't seem to get one
or more of the ingredients try another one.  If you still can't, you
can always buy small amounts from your school, or maybe from various
chemical companies.  When you do that, be sure to say as little as
possible, if during the school year, and they ask, say it's for a
experiment for school.
                 

How to Kill Someone

-------[=How to Kill Someone==]------------[=WITH YOUR BARE HANDS=]-----
           
       
This file will explain the basics of hand-to-hand combat, and will tell
of the best places to strike and kill an enemy...
When engaged in hand-to-hand combat, your life is always at stake.
There is only one purpose in combat, and that is to kill your enemy.
Never face an enemy with the idea of knocking him out.
The chances are extremely good that he will kill YOU instead.
When a weapon is not available, one must resort to the full
use of his natural weapons. The natural weapons are:

1. The knife edge of your hands.
2. Fingers folded at the second joint or knuckle.
3. The protruding knuckle of your second finger.
4. The heel of your hand.
5. Your boot
6. Elbows
7. Knees
8. and Teeth.

Attacking is a primary factor. A fight was never
won by defensive action. Attack with all of your strength.
At any point or any situation, some vulnerable point on your enemies
body will be open for attack. Do this while screaming as screaming has
two purposes.

1. To frighten and confuse your enemy.
2. To allow you to take a deep breath which, in turn, will put
more oxygen in your blood stream. Your balance and balance of your
enemy are two inportant factors; since, if you succeed in making
your enemy lose his balance, the chances are nine to
one that you can kill him in your next move. The best over-all
stance is where your feet are spread about shoulders width apart,
with your right foot about a foot ahead of the left. Both arms
should be bent at the elbows parallel to each other. Stand on the
balls of your feet and bend your waist slightly. Kinda of like a
boxer's crouch. Employing a sudden movement or a scream or yell can
throw your enemy off-balance. There are many vulnerable points of
the body. We will cover them now:

Eyes:Use your fingers in a V-shape and attack in gouging motion.

Nose:(Extremely vulnerable) Strike with the knife edge of the hand
along the bridge, which will cause breakage, sharp pain, temporary
blindness, and if the blow is hard enough, death. Also, deliver a blow
with the heel of your hand in an upward motion, this›will shove the
bone up into the brain causing death.

Adam's Apple: This spot is usually pretty well protected, but if you
get the chance, strike hard with the knife edge of your hand. This
should sever the wind-pipe, and then it's all over in a matter of
minutes.

Temple: There is a large artery up here, and if you hit it hard
enough, it will cause death. If you manage to knock your enemy down,
kick him in the temple, and he'll never get up again.

Back of the Neck: A rabbit punch, or blow delivered to the base of
the neck can easily break it, but to be safe, it is better to
use the butt of a gun or some other heavy blunt object.
Upper lip: A large network of nerves are located. These nerves are
extrememly close to the skin. A sharp upward blow will cause extreme
pain, and unconciosness.

Ears: Coming up from behind an enemy and cupping the hands in a clapping
motion over the victims ears can kill him immediately. The vibrations
caused from the clapping motion will burst his eardrums, and cause
internal bleeding in the brain.

Groin: A VERY vulnerable spot. If left open, get it with knee
hard, and he'll buckle over very fast.

Kidneys: A large nerve that branches off to the spinal cord comes very
close to the skin at the kidneys. A direct blow with the knife edge
of your hand can cause death.

There are many more ways to kill and injure an enemy, but these should
work best for the average person. This is meant only as information
and I would not recommend that you use this for a simple High School Brawl.
Use these methods only, in your opinion, if your life is in danger.
Any one of these methods could very easily kill or cause permanent damage
to someone. One more word of caution, you should practice these moves
before using them on a dummy, or a mock battle with a friend.
(You don't have to actually hit him to practice, just work on accuracy.)

How to make a landmine

How to make a landmine                    

First, you need to get a pushbutton switch. Take the wires of it
and connect one to a nine volt battery connector and the other to
a solar igniter (used for launching model rockets). A very thin
piece of stereo wire will usually do the trick if you are
desperate, but I recommend the igniter. Connect the other wire of
the nine-volt battery to one end of the switch. Connect a wire
from the switch to the other lead on the solar igniter.

       switch-----------battery
         \                  /
          \                /
           \              /
            \            /
            solar  igniter
                  |
                  |
                  |
              explosive

Now connect the explosive (pipe bomb, m-80, CO2 bomb, etc.) to the
igniter by attaching the fuse to the igniter (seal it with scotch
tape). Now dig a hole; not too deep but enough to cover all of the
materials. Think about what direction your enemy will be coming from
and plant the switch, but leave the button visible (not TOO
visible!). Plant the explosive about 3-5 feet away from the switch
because there will be a delay in the explosion that depends on how
short your wick is, and, if a homemade wick is being used, its
burning speed. But if you get it right... and your enemy is close
enough......... BBBBBBBOOOOOOOOOOOOOOOOOOOOOOOOMMMM! hahahaha

How to make Potassium Nitrate

How to make Potassium Nitrate              

Potassium Nitrate is an ingredient in making fuses, among other
things. Here is how you make it:

Materials needed:

 -3.5 gallons of nitrate bearing earth or other material
 -1/2 cup of wood ashes
 -Bucket or other similar container about 4-5 gallons in volume
 -2 pieces of finely woven cloth, each a bit bigger than the
  bottom of the bucket
 -Shallow dish or pan at least as large in diameter as the bucket
 -Shallow, heat resistant container
 -2 gallons of water
 -Something to punch holes in the bottom of the bucket
 -1 gallon of any type of alcohol
 -A heat source
 -Paper & tape

Procedure:

 - Punch holes on the inside bottom of the bucket, so that the
metal is"puckered" outward from the bottom

 - Spread cloth over the holes from the bottom

 - Place wood ashes on the cloth. Spread it out so that it covers
the entire cloth and has about the same thickness.

 - Place 2nd cloth on top of the wood ashes

 - Place the dirt or other material in the bucket

 - Place the bucket over the shallow container. NOTE: It may need
support on the bottom so that the holes on the bottom are not
blocked.

 - Boil water and pour it over the earth very slowly. Do NOT pour
it all at once, as this will clog the filter on the bottom.

 - Allow water to run through holes into the shallow dish on the
bottom.

 - Be sure that the water goes through ALL of the earth!

 - Allow water in dish to cool for an hour or so

 - Carefully drain the liquid in the dish away, and discard the
sludge in the bottom

 - Boil this liquid over a fire for at least two hours. Small
grains of salt will form - scoop these out with the paper as they
form

 - When the liquid has boiled down to 1/2 its original volume let
it sit

 - After 1/2 hour, add equal volume of the alcohol; when this
mixture is poured through paper, small white crystals appear. This
is the posassium nitrate.

Purification:

 - Redissolve crystals in small amount of boiling water

 - Remove any crystals that appear

 - Pour through improvised filter then heat concentrated solution
to dryness.

 - Spread out crystals and allow to dry

How To Make Fuses

Fuses                      

You would be surprised how many files are out there that use what
falls under the category of a "fuse." They assume that you just
have a few lying around, or know where to get them. Well, in some
parts of the country, fuses are extremely hard to come by... so
this file tells you how to make your own. Both fuses presented
here are fairly simple to make, and are fairly reliable.

SLOW BURNING FUSE
~~~~~~~~~~~~~~~~~ (approx. 2 inches per minute)

Materials needed:

 - Cotton string or 3 shoelaces
 - Potassium Nitrate or Potassium Chlorate
 - Granulated sugar

Procedure:

 - Wash the cotton string or showlaces in HOT soapy water, then
rinse with fresh water

 - Mix the following together in a glass bowl:
   1 part potassium nitrate or potassium chlorate
   1 part granulated sugar
   2 parts hot water

 - Soak strings or shoelaces in this solution

 - Twist/braid 3 strands together and allow them to dry

 - Check the burn rate to see how long it actually takes!!

FAST BURNING FUSE
~~~~~~~~~~~~~~~~~ (40 inches per minute)

Materials needed:

 -Soft cotton string
 -fine black powder (empty a few shotgun shells!)
 -shallow dish or pan

Procedure:

 - moisten powder to form a paste

 - twist/braid 3 strands of cotton together

 - rub paste into string and allow to dry

 - Check the burn rate!!!

How To Make a Fertilizer Bomb

How to make a fertilizer bomb                  

Ingredients:

- Newspaper
- Fertilizer (the chemical kind, GREEN THUMB or ORCHO)
- Cotton
- Diesel fuel

Make a pouch out of the newspaper and put some fertilizer in it.
Then put cotton on top. Soak the cotton with fuel. Then light and
run like you have never ran before! This blows up 500 square feet
so don't do it in an alley!!            

How to make a CO2 bomb

How to make a CO2 bomb

You will have to use up the cartridge first by either shooting it

or whatever. With a nail, force a hole bigger so as to allow the

powder and wick to fit in easily. Fill the cartridge with black

powder and pack it in there real good by tapping the bottom of the

cartridge on a hard surface (I said TAP not SLAM!). Insert a fuse.

I recommend a good water-proof cannon fuse, or an m-80 type fuse,

but firecracker fuses work, if you can run like a black man runs

from the cops after raping a white girl.) Now, light it and run

like hell! It does wonders for a row of mailboxes (like the ones

in apartment complexes), a car (place under the gas tank), a

picture window (place on window sill), a phone booth (place right

under the phone), or any other devious place. This thing throws

shrapnel, and can make quit a mess!! -Jolly Roger-

HOW TO GET ANY WINDOWS PASSWORD

HOW TO GET ANY WINDOWS PASSWORD

ok..... here are the full details.....

this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)

LC4 or LC5 (lophtcrack)( must be full version)

NTFSPro (doesn't matter if demo)

any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

P.S: I might not keep track of this forum, because I'm going to create a new topic and post tutorial there. if u want to post, plz post there.

How To Make Perfect Copies Of Maxis The Sims Discs, CloneCD Style!

How To Make Perfect Copies Of Maxis The Sims Discs, CloneCD Style!

verry simple.. get the latest version from h**p://slysoft.com download it , install, restart.

now that it's installed. Click in the "Read to Image" icon.. click next to get to the next screen.. select "Protected PC Game" click next.. and after it makes the image.. exit the program..

Now re-open CloneCD

click on the "Write from image" icon.. clicik next.. select "Protected PC Game" and click next.. NOTE:!! i tested this method with an CD-RW.. so far i wont/cant test with a CD-R (shouldn't make a difference) because i'm down to my last 3 CD-R's.. so you can try a CD-R.. i dont care but sofar i tested with the TDK 80min/700mb CD-RW blanks..

now i had it working without a patch.. after i burnt the disc.. i installed the sims from the burnt copy and tried to load.. IT Worked! i've got the sims in the background as i speak!.. not sure if anyone else knew about this but i got this idea in a dream about Digimon and Dragon Drive.. (DONT EVEN ASK WHY!) but "Guilmon" and "Chibi" said Tom.. to make a Perfect copy of The Sims CD's.. Use Clone CD.. afterwards . i woke up.. and i tried it! henh .. uncanny hunh?