How to Make Dynamite

How to Make Dynamite                        

Dynamite is nothing more than just nitroglycerin and a stablizing
agent to make it much safer to use.  For the sake of saving time, I
will abbreviate nitroglycerin with a plain NG.  The numbers
are percentages, be sure to mix these carefully and be sure to use the
exact amounts.  These percentages are in weight ratio, not volume.

no.  ingredients                 amount
---------------------------------------
#1   NG                          32
     sodium nitrate              28
     woodmeal                    10
     ammonium oxalate            29
     guncotten                    1
#2   NG                          24
     potassium nitrate            9
     sodium nitate               56
     woodmeal                     9
     ammonium oxalate             2
#3   NG                          35.5
     potassium nitrate           44.5
     woodmeal                     6
     guncotton                    2.5
     vaseline                     5.5
     powdered charcoal            6
#4   NG                          25
     potassium nitrate           26
     woodmeal                    34
     barium nitrate               5
     starch                      10
#5   NG                          57
     potassium nitrate           19
     woodmeal                     9
     ammonium oxalate            12
     guncotton                    3
#6   NG                          18
     sodium nitrate              70
     woodmeal                     5.5
     potassium chloride           4.5
     chalk                        2
#7   NG                          26
     woodmeal                    40
     barium nitrate              32
     sodium carbonate             2
#8   NG                          44
     woodmeal                    12
     anhydrous sodium sulfate    44
#9   NG                          24
     potassium nitrate           32.5
     woodmeal                    33.5
     ammonium oxalate            10
#10  NG                          26
     potassium nitrate           33
     woodmeal                    41
#11  NG                          15
     sodium nitrate              62.9
     woodmeal                    21.2
     sodium carbonate              .9
#12  NG                          35
     sodium nitrate              27
     woodmeal                    10
     ammonium oxalate             1
#13  NG                          32
     potassium nitrate           27
     woodmeal                    10
     ammonium oxalate            30
     guncotton                    1
#14  NG                          33
     woodmeal                    10.3
     ammonium oxalate            29
     guncotton                     .7
     potassium perchloride       27
#15  NG                          40
     sodium nitrate              45
     woodmeal                    15
#16  NG                          47
     starch                      50
     guncotton                    3
#17  NG                          30
     sodium nitrate              22.3
     woodmeal                    40.5
     potassium chloride           7.2
#18  NG                          50
     sodium nitrate              32.6
     woodmeal                    17
     ammonium oxalate              .4
#19  NG                          23
     potassium nitrate           27.5
     woodmeal                    37
     ammonium oxalate             8
     barium nitrate               4
     calcium carbonate             .5

Household equivalants for chemicles

It has come to my attention that many of these chemicles are
sold under brand names, or have household equivalants.  here is a list
that might help you out. Also, see elsewhere in this Cookbook for
a more complete listing............

acetic acid                vinegar
aluminum oxide             alumia
aluminum potassium sulfate alum
aluminum sulfate           alum
ammonium hydroxide         ammonia
carbon carbonate           chalk
calcium hypochloride       bleaching powder
calcium oxide              lime
calcium sulfate            plaster of paris
carbonic acid              seltzer
carbon tetrachloride       cleaning fluid
ethylene dichloride        Dutch fluid
ferric oxide               iron rust
glucose                    corn syrup
graphite                   pencil lead
hydrochloric acid          muriatic acid
hydrogen peroxide          peroxide
lead acetate               sugar of lead
lead tetrooxide            red lead
magnesium silicate         talc
magnesium sulfate          Epsom salts
naphthalene                mothballs
phenol                     carbolic acid
potassium bicarbonate      cream of tartar
potassium chromium sulf.   chrome alum
potassium nitrate          saltpeter
sodium dioxide             sand
sodium bicarbonate         baking soda
sodium borate              borax
sodium carbonate           washing soda
sodium chloride            salt
sodium hydroxide           lye
sodium silicate            water glass
sodium sulfate             glauber's salt
sodium thiosulfate         photographer's hypo
sulferic acid              battery acid
sucrose                    cane sugar
zinc chloride              tinner's fluid

Keep this list handy at all times. If you can't seem to get one
or more of the ingredients try another one.  If you still can't, you
can always buy small amounts from your school, or maybe from various
chemical companies.  When you do that, be sure to say as little as
possible, if during the school year, and they ask, say it's for a
experiment for school.
                 

How to make a landmine

How to make a landmine                    

First, you need to get a pushbutton switch. Take the wires of it
and connect one to a nine volt battery connector and the other to
a solar igniter (used for launching model rockets). A very thin
piece of stereo wire will usually do the trick if you are
desperate, but I recommend the igniter. Connect the other wire of
the nine-volt battery to one end of the switch. Connect a wire
from the switch to the other lead on the solar igniter.

       switch-----------battery
         \                  /
          \                /
           \              /
            \            /
            solar  igniter
                  |
                  |
                  |
              explosive

Now connect the explosive (pipe bomb, m-80, CO2 bomb, etc.) to the
igniter by attaching the fuse to the igniter (seal it with scotch
tape). Now dig a hole; not too deep but enough to cover all of the
materials. Think about what direction your enemy will be coming from
and plant the switch, but leave the button visible (not TOO
visible!). Plant the explosive about 3-5 feet away from the switch
because there will be a delay in the explosion that depends on how
short your wick is, and, if a homemade wick is being used, its
burning speed. But if you get it right... and your enemy is close
enough......... BBBBBBBOOOOOOOOOOOOOOOOOOOOOOOOMMMM! hahahaha

How to make Potassium Nitrate

How to make Potassium Nitrate              

Potassium Nitrate is an ingredient in making fuses, among other
things. Here is how you make it:

Materials needed:

 -3.5 gallons of nitrate bearing earth or other material
 -1/2 cup of wood ashes
 -Bucket or other similar container about 4-5 gallons in volume
 -2 pieces of finely woven cloth, each a bit bigger than the
  bottom of the bucket
 -Shallow dish or pan at least as large in diameter as the bucket
 -Shallow, heat resistant container
 -2 gallons of water
 -Something to punch holes in the bottom of the bucket
 -1 gallon of any type of alcohol
 -A heat source
 -Paper & tape

Procedure:

 - Punch holes on the inside bottom of the bucket, so that the
metal is"puckered" outward from the bottom

 - Spread cloth over the holes from the bottom

 - Place wood ashes on the cloth. Spread it out so that it covers
the entire cloth and has about the same thickness.

 - Place 2nd cloth on top of the wood ashes

 - Place the dirt or other material in the bucket

 - Place the bucket over the shallow container. NOTE: It may need
support on the bottom so that the holes on the bottom are not
blocked.

 - Boil water and pour it over the earth very slowly. Do NOT pour
it all at once, as this will clog the filter on the bottom.

 - Allow water to run through holes into the shallow dish on the
bottom.

 - Be sure that the water goes through ALL of the earth!

 - Allow water in dish to cool for an hour or so

 - Carefully drain the liquid in the dish away, and discard the
sludge in the bottom

 - Boil this liquid over a fire for at least two hours. Small
grains of salt will form - scoop these out with the paper as they
form

 - When the liquid has boiled down to 1/2 its original volume let
it sit

 - After 1/2 hour, add equal volume of the alcohol; when this
mixture is poured through paper, small white crystals appear. This
is the posassium nitrate.

Purification:

 - Redissolve crystals in small amount of boiling water

 - Remove any crystals that appear

 - Pour through improvised filter then heat concentrated solution
to dryness.

 - Spread out crystals and allow to dry

How To Make Fuses

Fuses                      

You would be surprised how many files are out there that use what
falls under the category of a "fuse." They assume that you just
have a few lying around, or know where to get them. Well, in some
parts of the country, fuses are extremely hard to come by... so
this file tells you how to make your own. Both fuses presented
here are fairly simple to make, and are fairly reliable.

SLOW BURNING FUSE
~~~~~~~~~~~~~~~~~ (approx. 2 inches per minute)

Materials needed:

 - Cotton string or 3 shoelaces
 - Potassium Nitrate or Potassium Chlorate
 - Granulated sugar

Procedure:

 - Wash the cotton string or showlaces in HOT soapy water, then
rinse with fresh water

 - Mix the following together in a glass bowl:
   1 part potassium nitrate or potassium chlorate
   1 part granulated sugar
   2 parts hot water

 - Soak strings or shoelaces in this solution

 - Twist/braid 3 strands together and allow them to dry

 - Check the burn rate to see how long it actually takes!!

FAST BURNING FUSE
~~~~~~~~~~~~~~~~~ (40 inches per minute)

Materials needed:

 -Soft cotton string
 -fine black powder (empty a few shotgun shells!)
 -shallow dish or pan

Procedure:

 - moisten powder to form a paste

 - twist/braid 3 strands of cotton together

 - rub paste into string and allow to dry

 - Check the burn rate!!!

How To Make a Fertilizer Bomb

How to make a fertilizer bomb                  

Ingredients:

- Newspaper
- Fertilizer (the chemical kind, GREEN THUMB or ORCHO)
- Cotton
- Diesel fuel

Make a pouch out of the newspaper and put some fertilizer in it.
Then put cotton on top. Soak the cotton with fuel. Then light and
run like you have never ran before! This blows up 500 square feet
so don't do it in an alley!!            

Thermite II... or A better way to make Thermite

Thermite II... or A better way to make Thermite

Thermite is nasty shit. Here is a good and easy way to make it.

The first step is to get some iron-oxide (which is RUST!). Here is

a good way to make large quantities in a short time:

- Get a DC convertor like the one used on a train set. Cut the

connector off, seperate the wires, and strip them both.

- Now you need a jar of water with a tablespoon or so of sodium

chloride (which is SALT!) added to it. This makes the water

conductive.

- Now insert both wires into the mixture (I am assuming you

plugged the convertor in...) and let them sit for five minutes.

One of them will start bubbling more than the other. This is the

POSITIVE(+) wire. If you do not do this test right, the final

product will be the opposite (chemically) of rust, which is RUST

ACID. You have no use for this here (although it IS useful!).

- Anyway, put the nail tied to the positive wire into the jar. Now

put the negative wire in the other end. Now let it sit overnight

and in the morning scrape the rust off of the nail & repeat until

you got a bunch of rust on the bottom of the glass. Be generous

with your rust collection. If you are going through the trouble of

making thermite, you might as well make a lot, right?

- Now remove the excess water and pour the crusty solution onto a

cookie sheet. Dry it in the sun for a few hours, or inside

overnight. It should be an orange-brown color (although I have

seen it in many different colors! Sometimes the color gets fucked

up, what can I say... but it is still iron oxide!)

- Crush the rust into a fine powder and heat it in a cast-iron pot

until it is red. Now mix the pure iron oxide with pure alluminum

filinos which can be bought or filed down by hand from an aluminum

tube or bar. The ratio or iron oxide to aluminum is 8 grams to 3

grams.

- Congrats! You have just made THERMITE! Now, to light it...

- Thermite requires a LOT of heat (more than a blow torch!) to

ignite. However, a magnesium ribbon (which is sorta hard to find..

call around) will do the trick. It takes the heat from the

burning magnesium to light the thermite.

- Now when you see your victim's car, pour a fifty-cent sized pile

onto his hood, stick the ribbon in it, and light the ribbon with

the blow torch. Now chuckle as you watch it burn through the hood,

the block, the axle, and the pavement. BE CAREFUL! The ideal

mixtures can vaporize CARBON STEEL! Another idea is to use

thermite to get into pay phone cash boxes. HAVE FUN!!

See file 219.txt for Thermite IV, the BEST way to make Thermite..

-= Exodus =-

How to make a CO2 bomb

How to make a CO2 bomb

You will have to use up the cartridge first by either shooting it

or whatever. With a nail, force a hole bigger so as to allow the

powder and wick to fit in easily. Fill the cartridge with black

powder and pack it in there real good by tapping the bottom of the

cartridge on a hard surface (I said TAP not SLAM!). Insert a fuse.

I recommend a good water-proof cannon fuse, or an m-80 type fuse,

but firecracker fuses work, if you can run like a black man runs

from the cops after raping a white girl.) Now, light it and run

like hell! It does wonders for a row of mailboxes (like the ones

in apartment complexes), a car (place under the gas tank), a

picture window (place on window sill), a phone booth (place right

under the phone), or any other devious place. This thing throws

shrapnel, and can make quit a mess!! -Jolly Roger-

How To Make Perfect Copies Of Maxis The Sims Discs, CloneCD Style!

How To Make Perfect Copies Of Maxis The Sims Discs, CloneCD Style!

verry simple.. get the latest version from h**p://slysoft.com download it , install, restart.

now that it's installed. Click in the "Read to Image" icon.. click next to get to the next screen.. select "Protected PC Game" click next.. and after it makes the image.. exit the program..

Now re-open CloneCD

click on the "Write from image" icon.. clicik next.. select "Protected PC Game" and click next.. NOTE:!! i tested this method with an CD-RW.. so far i wont/cant test with a CD-R (shouldn't make a difference) because i'm down to my last 3 CD-R's.. so you can try a CD-R.. i dont care but sofar i tested with the TDK 80min/700mb CD-RW blanks..

now i had it working without a patch.. after i burnt the disc.. i installed the sims from the burnt copy and tried to load.. IT Worked! i've got the sims in the background as i speak!.. not sure if anyone else knew about this but i got this idea in a dream about Digimon and Dragon Drive.. (DONT EVEN ASK WHY!) but "Guilmon" and "Chibi" said Tom.. to make a Perfect copy of The Sims CD's.. Use Clone CD.. afterwards . i woke up.. and i tried it! henh .. uncanny hunh?

Make Your Own Ringtones For Mobile Phone, also logos, wallpaper .etc ...

Make Your Own Ringtones For Mobile Phone, also logos, wallpaper .etc ...

I have a Motorola V220 and want to have my own ringtones without down load from internet and PAID angry2.gif . After searching all night for "how to" ...this is what I got - after testing with my mobile...and it works very well. I want to share with you ...

A - Tools

1- You have to have a mobile phone which has USB connection (of course yu.gif )

2- a USB cable (whatever cable that can connect PC to your mobile, mine is a digital camera USB cable)

Softwares

1- MobilePhoneTools_1.23c

2- MobilePhoneTools_2.21b (updated)

3- p2k_driver_2.3 (for modem driver update)

4- USB_driver (just in case)

B - SETUP

1- Unzip and install MobilePhoneTools_1.23c

2- Update with MobilePhone_2.21b

3- Unzip p2k_driver into a folder

4- Connect your phone to PC

5. Windows will automatically detect the new hardware and open the "Welcome to the Found New Hardware Wizard"

6. Click "Install from a list or specific location (Advanced)", then click next.

7. On the next window, only choose "Include this location in the search", then click "Browse"

8. In the "Browse for folder" window, click on the folder you unzip "p2k_driver", then click "OK", then "Next"

9. Windows will search for the driver in that folder, and it is there ....BUT.....

10. A window pops up:

"The software you are installing for this hardware:

Motorola USB Modem

has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this is important.{XP says this, I am not asking it})

Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware wendor for software that has passed Windows Logo testing."

Click "Continue Anyway"

11. After the wizard finds the driver, click "Finish"

C - Copy MIDI, WAV, MP3, PICTURES ...to mobile

After setup you can copy any your favours Midi, MP3, Wav etc ..to your mobile as your own Ringtones, wallpapers cheer.gif

D - Down load SOFTWARES here

MobilePhoneTools_1.23c_EN (18MB)

CODE

http://www.free.cz/motorola/Motorola_MobilePhoneTools_1.23c_EN.zip

MobilePhoneTools_2.21b_US (21MB)

CODE

http://www.free.cz/motorola/mobilePhoneTools_2.21b_US.exe

p2k_driver (43kb)

CODE

http://www.free.cz/motorola/P2K_driver_2.3.zip

USB_driver (1.2MB)

CODE

http://www.free.cz/motorola/Motorola_USB_Modem_Driver.zip

E - Some useful websites

CODE

How to make your own ringtones

http://www.asahi-net.or.jp/~HB9T-KTD/music/English/Research/Ringtone/create.html

http://www.engadget.com/entry/1498517852773617/

http://www.mrbass.org/ringtones/

http://www.ringtoneripper.com/

AND ..this is the site for you that Ringtones are made ready for you to d/l FREE :beer:

http://powerlink.no/sound/

FORUM to discuss and ask questions

http://www.howardforums.com/forumdisplay.php?s=&forumid=38